Tub to Shower Conversion in Texas

Remove Your Old Bathtub. Gain a Safer, More Accessible Shower. Completed in 2 Days Across DFW, Austin, San Antonio & West Texas.

Why Convert Your Tub to a Shower?

For many households, the bathtub in the master bathroom has not been used for an actual bath in years — but its presence makes the bathroom meaningfully more dangerous every single day. Stepping over the 14-to-18-inch sidewall of a standard bathtub to enter and exit is one of the highest-risk moments in any home environment for adults with reduced balance, strength, or flexibility.

The CDC reports that nearly 235,000 emergency room visits annually result from bathroom injuries, with the bathtub and shower as the most common injury location. Among adults 65 and older, a fall that results in a hip fracture carries a 20–30% one-year mortality rate and an average total cost — hospitalization, rehabilitation, and lost independence — exceeding $50,000. The bathtub step is not a trivial risk.

A tub-to-shower conversion addresses that risk directly by removing the tub entirely and replacing it with a walk-in shower that has a low or curbless entry. The result is a bathroom that is genuinely safer to use every day — not just theoretically safer on a checklist. Beyond safety, the conversion eliminates the cleaning burden of a tub you never use, makes the bathroom feel significantly more spacious, and updates the aesthetic of what is often the most dated element in an older home's master bath.

The National Association of Realtors finds that tub-to-shower conversions in master bathrooms — particularly in homes that already have a separate soaking tub — consistently deliver strong returns on investment at resale. Buyers increasingly prefer accessible, walk-in showers over traditional tub configurations.

EverSafe Showers completes most tub-to-shower conversions in just two days. Our team handles everything from tub removal through final fixture installation — no need to coordinate multiple contractors or live through weeks of renovation. The shower is functional within 48 hours of when we start.

Complete bathtub removal and disposal
Low or curbless shower entry
Premium porcelain wall panels — mildew-resistant
Slip-resistant shower pan — safety as standard
Grab bar installation with structural blocking
Handheld showerhead
Optional built-in or fold-down bench seating
2-day installation — shower functional within 48 hours
Tub to shower conversion by EverSafe Showers Texas

2-Day Transformation

Tub removed, accessible shower installed — 48 hours

Why Choose EverSafe for Your Tub-to-Shower Conversion?

2-Day Installation

Complete conversion — tub removal through finished shower — in just 2 days. We do not leave a bathroom in mid-renovation while we wait for materials or schedule follow-up visits. You have a fully functional shower within 48 hours.

Safety Built In

Every conversion includes slip-resistant shower pans, low or curbless entry, and grab bar blocking installed in the walls. These are not upgrades you pay extra for — they are our standard specification because they reflect why most of our customers are making the conversion in the first place.

Limited Lifetime Warranty

Our installations are backed by a Limited Lifetime Warranty on materials and workmanship. We use made-in-USA porcelain wall panels specified for longevity — not the thinner acrylic panels that show wear within a few years.

The Conversion Process in Detail

Day 1: Removal and Waterproofing

We begin by disconnecting the tub drain and water supply, then removing the tub itself — typically steel, cast iron, or fiberglass — along with the tub surround tiles or panels, and any water-damaged drywall or subfloor material. We inspect the subfloor and framing for damage and address any issues before building the new shower floor. A continuous waterproofing membrane is applied across the new shower floor area and up the walls to a minimum 72-inch height, with fabric-reinforced tape at all corners.

Drain Configuration

The existing tub drain location may or may not work for the new shower layout. If the shower footprint matches the tub footprint, the drain often stays in place. If the shower is expanded, the drain may need to be relocated. We assess drain location during our initial visit so there are no surprises on installation day. In Texas, drain relocation for a shower conversion typically does not require a permit, but we verify local requirements for each municipality we work in.

Day 2: Panels, Fixtures, and Finishing

Large-format porcelain wall panels are cut to size and installed with construction adhesive and mechanical fasteners. Panel seams and inside corners are sealed with color-matched silicone caulk — not grout, which cracks over time at flexible joints. Fixture holes are cut for the showerhead, controls, and diverter valve. A handheld showerhead is installed as standard. Grab bars are installed into studs or blocking. The threshold — low-profile or zero — is the final waterproof element installed before cleanup.

Wall Panels vs. Tile: Why We Default to Panels

Traditional ceramic tile is beautiful but has meaningful maintenance liabilities in a shower environment: grout lines collect mildew, grout cracks at flexible joints over time, and re-grouting is messy and expensive. Large-format porcelain panels have far fewer seams — typically just four vertical seams in a standard three-wall shower — and those seams are sealed with silicone rather than grout. The result is easier to clean, more mildew-resistant, and longer-lasting. We can install tile for customers who specifically prefer it, but we explain the trade-offs clearly.

Tub to Shower Conversions Across Texas

Texas has a large housing stock built in the 1980s and 1990s — an era when tub-only master bathrooms were the standard configuration. Many of those homes are now occupied by their original owners, now in their 60s and 70s, who find the tub they installed 30 years ago has become a daily hazard. EverSafe Showers has completed hundreds of tub-to-shower conversions across DFW, Austin, San Antonio, and West Texas. We bring the same standards and materials — and the same 2-day completion commitment — to every project, whether your home is in Southlake, Cedar Park, New Braunfels, or Odessa.

Areas We Cover

We proudly serve Dallas–Fort Worth, Houston, Austin, San Antonio, and West Texas. Our team is ready to bring our expertise to your neighborhood.

Our Service Areas

Texas Service Areas Map

We serve each of these regions along with the surrounding cities and towns around them. Select a region below, then choose your city to see how we can help.

Don't see your city?

We probably serve your city - call us to find out!

Call 1-888-567-1163

Contact EverSafe Showers

Veteran-Owned & Family-Operated Bathroom Remodeling Professionals

Ready for Your Free Consultation? Let's Get Started.

Call 1-888-567-1163

By submitting this form, you consent to be contacted by EverSafe Showers regarding your project.